--- 3.1.10 ---
TUFLOW Viewer - Cursor location on cross-section plot is now projected
onto map canvas
TUFLOW Viewer - Added hover over labels on curtain plot
TUFLOW Viewer - Fixed load from TCF that would fail if more than 2
variables were used in a row in output folder name
TUFLOW Viewer - Fixed bug that could cause QGIS to crash when removing
particle and map output results from Layers Panel at the same time
TUFLOW Viewer - Active result type(s) are now retained as 'off' if the
result is toggled in the 'Results' list
TUFLOW Viewer - Active time is retained if the result is toggled in
the 'Results' list
TUFLOW Viewer - Fixed bug that could cause result type not to render
if maximum value was toggled on in a previous open result and current
result does not contain a maximum
TUFLOW Viewer - Fixed bug that user to have to deselect result in
'Results' list a couple of times to toggle it off after loading from a
project file
TUFLOW Viewer - Particle results are now only displayed if the result
is selected in 'Results' list
TUFLOW Viewer - Fix bug that could cause QGIS to crash on close if
particle results were loaded with map output results
TUFLOW Viewer - Fix bug that would cause curtain plot colour bar
legend to not show if there was a result on the secondary axis
TUFLOW Viewer - Curtain plot colour bar will now be removed if the
user toggles off legend
TUFLOW Viewer - Fix bug that could cause hydraulic table to display
properties from incorrect channel
TUFLOW Viewer - Sped up curtain plots on xmdf / dat results by saving
bed elevation data after first plot
TUFLOW Viewer - Fixed bug that could occur sometimes when
selecting/deselecting result types that would cause some muddling of
plotting and displayed results
TUFLOW Viewer - Fixed bug in hover over label routine that would
sometimes cause plot to relimit when user's mouse enters the plot
area
TUFLOW Viewer - Fixed bug where unrecognised flow regime typese would
cause python error - more types inlcuded, but won't error when
encounters unknown
TUFLOW Viewer - Added units on axis name for sediment, Q SED, Q TRACE,
Q SALT
TUFLOW Viewer - Updated hover snapping to hopefully be nicer - will
check other datasets for closer values (previously would stop at first
found)
TUFLOW Viewer - Different Time Series geometry types can be viewed at
the same time now - e.g. flow from 2d_po line and level from 2d_po
point
TUFLOW Viewer - Fixed bug loading time series where timesteps were
sometimes being loaded incorrectly
TUFLOW Viewer - Sped up curtain plot updating (e.g. updating the time)
a little by saving mesh interesects / faces
TUFLOW Viewer - Added TUFLOW FV time series outputs
Load from TCF - Quadtree control file will now be loaded
TUFLOW Styling - Fixed _sac_check_R style

--- 3.1.9 ---
TUFLOW Viewer - Added hover-over labelling on plots
TUFLOW Viewer - Toggling 'Show as Dates' will no longer reload default
mesh styles - previously this would override any changes in style the
use had made to the mesh
TUFLOW Viewer - Toggling 'Show as Dates' could sometimes badly
relimited curtain plot axis if the Long Plot plot wasn't the active
plot when toggled
TUFLOW Viewer - Curtain plot retains colour bar name changes
TUFLOW Viewer - Cross section / long profile plot will now correctly
reset user colour changes (when requested through the View menu)
TUFLOW Viewer - Fixed bug in FM time series import
TUFLOW Viewer - 3D to 2D depth average time series plotting working
again
TUFLOW Viewer - Curtain plot should now auto update extent correctly
in QGIS 3.20
TUFLOW Viewer - Fixed bug when opening mesh layer properties with
multiple results selected which would cause python error after
selected a mesh layer
TUFLOW Viewer - Animation tool will now correctly animate only the
selected result in animation dialog
TUFLOW Viewer - Fixed an error that could occur when saving default
vector style while viewing netcdf results
TUFLOW Viewer - FV netCDF results now correctly show dry areas when
plotted
Load From TCF - Rainfall control file now included
Auto label - Fixed labelling tool so it correctly applies
_messages.txt label properties to messages.shp
1D Integrity Tool - Added label option to flow trace long section
1D Integrity Tool - Fixed a bug that would result in an 'unexpected
error'
Import Empty - Added _pts to empty list
ARR Tool - Fixed bug that would cause an error when adding additional
temporal patterns due to areal temporal patterns not being downloaded
correctly
ARR Tool - Fixed bug that would not output 30m duration storm if 30h
storm was also selected
ARR Tool - Python version independent
ARR Tool - Changed plotting backend to qt5agg
Fixed bug that would cause TUFLOW plugin to not load if the netCDF4
Python library was not installed

--- 3.1.8 ---
SWAN GIS Tools - Added tool as beta to plugin
TUFLOW Viewer - fixed bug that could occur when 'min_' was in the
result type name that caused results to not load properly - usually
resulting from outputs from res_to_res.exe
TUFLOW Viewer - fixed bug that would cause Python error when exporting
or copying plot data containing null x values and a datetime axis
TUFLOW Viewer - Fixed bug that could cause 1D velocity TS to not plot
if several results with different number of output times were
selected
TUFLOW Viewer - Added 'Redock TUFLOW Viewer' option under Settings
menu in case TUFLOW Viewer gets stuck as a floating window and unable
to dock
TUFLOW Viewer - Export animation tool can once again automatically
download ffmpeg.exe for Windows
TUFLOW Viewer - Time slider will update properly when user switches
between results (previously required user to change time to get it to
update)
TUFLOW Viewer - Updated the plot right-click context menu signal
unloading to try and stop errors occuring when upgrading the plugin
TUFLOW Viewer - Rename result functionality broke in QGIS 3.20 due to
Python version upgrade
ARR Tool - removed qt4agg backend dependency for plot generation -
this could produce a warning message after running the tool
TUFLOW Styling - Tweaked Flood Modeller result styling
TUFLOW Styling - Added styling for lfcsh_uvpt_check

--- 3.1.7 ---
Auto Label - Added auto label rules for the _messages GIS layer
TUFLOW Viewer - Fixed a bug that could occur when exporting plot to
csv
TUFLOW Viewer - Now catch issue when plot is empty when exporting or
copying data - also added more messaging
TUFLOW Viewer - Fixed a bug that could occur if more than 6 results
were loaded at once that would cause TUFLOW Viewer to hang
indefinitely
TUFLOW Viewer - Fixed bug that would cause problems if mesh layer was
renamed in QGIS layer panel
TUFLOW Viewer - Fixed bug with map output cross-section plotting that
could occur when output timesteps precision was finer than 1 second
TUFLOW Viewer - Changed behaviour of plot when using 'show current
time' - the vertical bar no longer affects plot extents and won't
force plot to refresh
TUFLOW Viewer - Unchecking legend position will also turn plot legend
off
ARR to TUFLOW - Updated routine that collects rainfall data from BOM
ARR to TUFLOW - Added all column headers to output bc_dbase.csv

--- 3.1.6 ---
ARR tool - Fix bug that would not calculate burst initial loss
correctly with user specified loss and probability neutral loss
ARR tool - Probability neutral losses and complete storm check boxes
are now mutually exclusive options in dialog
Load TUFLOW Layers from TCF - MIF layers will automatically open all
geometry types without user prompt
Load TUFLOW Layers from TCF - Raster layers will be automatically be
given the projection of first loaded vector layer if it doesn't have
one
TUFLOW Viewer - Fixed bug in 'Remove - Map Outputs' that would remove
the layer from QGIS but not from TUFLOW Viewer
TUFLOW Viewer - Load FM time series results will now create
cross-sections based on gxy file if not already georeferenced
TUFLOW Viewer - Load FM time series results corrected fixed field
error in reading dat file that would cause incorrect unit names
TUFLOW Viewer - Fixed vertical profile plotting when adding to an
animation
TUFLOW Viewer - Fixed a few bugs in batch map export tool, mainly
fixes for latest QGIS API
TUFLOW Viewer - Fixed dat file loading
TUFLOW Viewer - Fixed TUFLOW FV xmdf loading
TUFLOW Viewer - Narrow view will now remember last docked location (if
set as default layout)
TUFLOW Viewer - Fixed bug - first time results are loaded, the times
are offset by user's time zone
TUFLOW Viewer - Batch export plots will now remove any mesh results
when finished plotting from them that were loaded by the tool
TUFLOW Viewer - Plot right-click context menu will no longer appear if
plot pan or zoom tools are in use
TUFLOW Viewer - Re-organised 'Settings >> Options' dialog box in a new
tab layout
TUFLOW Viewer - Added legend font size option, axis font size option,
axis label font size option
TUFLOW Viewer - Added option to set a default plot font size
TUFLOW Viewer - Fixed a bug that would cause python error when user
selected 'Show as dates' when 'show current time' was on and secondary
axis was also in use
TUFLOW Viewer - Fixed bug that would cause python error if user
'cleared plot' while in the middle of drawing a plot location
TUFLOW Viewer - Added user defined plot background colour (in settings
>> options)
TUFLOW Viewer - Added more customisable legend options (position,
orientation)
TUFLOW Viewer - Exporting drawn plot lines / points to shp is now
exported to a 2d_po format
TUFLOW Viewer - Fixed axis mis-naming when plotting flow regime (was
incorrectly using flow units)
TUFLOW Viewer - Fixed bug when trying to plot with dates after
toggling on/off secondary axis
TUFLOW Viewer - Fixed bug in User Plot Data Manager that would cause
issues if user changed dataset name
TUFLOW Viewer - Fixed bug that would only display User Plot Data on
time series plot (regardless of selected 'plot type')
TUFLOW Viewer - Fixed bug that would cause python error when trying to
view user plot data in manager if selection was on the 'plot type'
TUFLOW Viewer - Fixed bug when loading from TLF that would prevent
load if there were periods in file name

--- 3.1.5.5 ---
TUFLOW Viewer - Added plot value display when plot is clicked

--- 3.1.5.4 ---
ARR tool - fixed ARF for catchments less than 10km2 that caused python
error (introduced in 3.1.5)

--- 3.1.5.3 ---
TUFLOW Viewer - Fixed bug that would cause python error when changing
'zero date'
TUFLOW Viewer - Fixed bug that would cause python error if 1D 'losses'
plot option was selected with a 2D plot object selected
TUFLOW Viewer - Fixed bug that would make mesh disappear when
switching between results if "show grid" was on
Import Empty Tool - Fixed bug that would cause error if overwriting
existing file
Import Empty Tool - Fixed typo in error message "No Empty File T
specified" should be "No Empty File specified"

--- 3.1.5 ---
SCS Curve number calculation and export to TUFLOW tool added (beta)
ReFH2 tool - ReFH2 engine 2.3 option added
ReFH2 tool - Added climate change options
ReFH2 tool - Added urban area input option
ReFH2 tool - Added version and BFIHOST19 input check
ReFH2 tool - Added engine version option
ARR tool - NSW datahub continuing loss multiplied by 0.4
ARR tool - let users set event independent continuing loss
ARR tool - now recognises NaN rainfall loss values from the datahub
and sets losses to zero
ARR tool - Fixed bug that miscalculated ARF for short durations for
catchments between 1 - 10km2
TUFLOW Viewer - Import FM timeseries results added
TUFLOW Viewer - Fixed bug that would incorrectly flag layers as 1D
cross section and cause QGIS to hang
TUFLOW Viewer - Customising plot 'select axes' dialog has nicer labels
'primary axis' and 'secondary axis'
TUFLOW Viewer - Minimums fixed for TUFLOW Classic results when
importing XMDF
TUFLOW Viewer - Fixed a bug in animation tool that would error when
adding plots if current time was already displayed in time series plot
window
TUFLOW Viewer - Fixed an issue with connection signals trying to
persist after tuflow viewer is completely closed
TUFLOW Viewer - Fixed vertical profile plotting - broke with new
python version
TUFLOW Viewer - For QGIS 3.16+ TUFLOW viewer now adopts absolute time
as default (internal workings - no change for users)
TUFLOW Utilities tool - Fixed the downloader - exe location was not
being correctly input
TUFLOW Utilities tool - Made further improvements to error checking
Import check files tool - Fixed bug in import all check files from a
folder where it would duplicate layers
Reload layer tool -  no longer produces an error for non-vector layers
- it still only works for vector layers
Many small bug fixes

--- 3.1.4.1 ---
Uninstalling plugin should now work unless the ReFH2 tool has been
run

--- 3.1.4 ---
Prj string for shp files are retained with increment and import empty
tools
Maximums in TUFLOWFV dat files now handled
Fixed bug that would cause python error when saving project after
updating colour ramp options for curtain plots
Utility download links updated to reflect new website
Fixed bug in ARR tool that would cause tool to crash when using
probability neutral losses

---  3.1.3 ---
Fixed 'Close TUFLOW Viewer completely
Fixed bug in curtain plots with quadtree results
Further plugin unloading improvements
Fixed a few bugs in batch export
Fixed bug where saving a project would stop user from being able to
change zero time (tuflow classic)

---  3.1.2.3 ---
Mulitple curtain plots (lines and result types) now supported - useful
for animations

---  3.1.2.2 ---
Batch export plot now supports selecting results not yet loaded into
QGIS

---  3.1.2.1  ---
Fixed bug when curtain plotting TUFLOW FV results
Fixed datetime bug in animation tool

---  3.1.2  ---
XS viewer will now load null or blank entries
Depth time series added
Added reset all plot colours to settings menu
Fixed issue with unloading plugin
Fixed qgs temporal controller interaction
Fixed errors when saving and loading project settings
Fixed bug when plotting flow from cell centred netcdf results
Fixed bug for QGIS 3.14+ when using small output intervals
Fixed a couple of errors with loading default styles
Fixed bug in animation tool when adding a plot with a secondary axis
Fixed issue when loading in time series results with '[' in run name
TUFLOW styling will check style folder first before applying any
defaults

---  3.1.1  ---
Fixed backward compatibility

---  3.1.0  ---
Compatible with QGIS temporal controller
Added new plotting types for 3D datasets
Added Cross section viewing capabilities
Added ability to load 1D hydraulic check files
Added particle tracking loading / viewing
Added further error checking / messaging to 1D integrity tool
Fixed bug in ARR tool that would occur when adding additional temporal
patterns with large catchments that required Areal TP
Fixed minor bug with case sensitivity when loading results through TCF
file
Removed message window "appended .shp to output" from increment tool

None